Worship Space Acoustic Design in Australia — ISO 3382 Requirements
Churches, mosques, synagogues, temples. Typical volume: 500-20,000 m³.
What ISO 3382 Requires for a Worship Space in Australia
Regulation: ISO 3382-1 — measurement reference
RT60 target: 1.5–2.5s
Background noise limit: NR-25
STI requirement: ≥ 0.45
How to Calculate ISO 3382 Compliance for a Worship Space in Australia
- 1
Identify the applicable Australia standard and target
Look up ISO 3382 for worship space spaces in Australia. The RT60 target is 1.5–2.5s. ISO 3382-1 — measurement reference.
- 2
Measure or model the room geometry
Record the length, width, and height of the room to calculate the volume. A typical worship space has a volume of 500-20,000 m³.
- 3
List all surfaces and their absorption coefficients
For each surface (floor, ceiling, walls, windows, doors), find the absorption coefficient at each octave band frequency (125 Hz to 4 kHz) from ISO 354 test data or a materials database.
- 4
Calculate total absorption and apply the Sabine or Eyring equation
Sum all surface absorption values: A = sum of (alpha x area). Then apply T60 = 0.161 x V / A (Sabine) or T60 = -0.161 x V / (S x ln(1 - alpha_avg)) (Eyring). Use Eyring when average alpha exceeds 0.20.
- 5
Compare result against ISO 3382 and specify treatment
If the calculated RT60 exceeds the target of 1.5–2.5s, specify additional absorption. Typical treatment cost in Australia is AUD 150–AUD 350/m².
Cost of Compliance in Australia
Treatment Cost Range
AUD 150–AUD 350/m²
Currency: AUD
What Affects Cost
- • Room volume and surface area
- • Target standard strictness
- • Existing acoustic conditions
- • Finish and material quality
Frequently Asked Questions
What RT60 does ISO 3382 require for a worship space in Australia?
ISO 3382 requires a reverberation time of 1.5–2.5s for worship space spaces in Australia. ISO 3382-1 — measurement reference. Measurement should be performed per ISO 3382-2 methodology.
What is the background noise limit for a worship space in Australia?
The background noise limit is NR-25 under ISO 3382. This typically refers to HVAC and building services noise measured with the room unoccupied.
How much does acoustic treatment cost for a worship space in Australia?
Typical acoustic treatment for a worship space in Australia costs AUD 150–AUD 350/m². Costs vary based on finish quality, room size, and existing conditions.
Calculate ISO 3382 Compliance for Your Worship Space in Australia
Enter your room dimensions, select materials, and instantly verify compliance against ISO 3382. Free, no signup required.
Open Free RT60 Calculator